Washing Your House with Pressure Washer: Tips to Do It Properly

Now that you decided to clean your entire house including the exterior, you have to remember that there is an easy way to do it. Maybe you decided to paint the exterior of the house or you simply want to clean it. Whatever your reasons are, you will find that pressure washers will be able to make the job of cleaning easy for you.

Besides, using a scraper, a scrub brush, and a bucket full of soapy water to do the job will definitely turn you off. With a pressure washer, you will see that the job will be a lot easier to do. In fact, you might even enjoy it.

The great thing about using pressure washer is that it makes the job a lot safer and a lot easier. So, here are tips that can make it easier for you to wash your house with a pressure washer. With these tips, you will be able to save a lot of time and money.

When using a pressure washer to wash a house, you have to start at the foundation and work your way up to the gutters. You should use a cleaning solution when washing the exterior of your house. To eliminate streaking, you should use a soapy attachment with the pressure washer. Then, you can spray the cleaning solution on your house.

Always remember that you should not let the cleaner dry before washing it off the side of your house. Also, you should do this with the high pressure spray and a 25 degree nozzle.

Sometimes the most important aspects of a subject are not immediately obvious. Keep reading to get the complete picture.

When washing your house with a pressure washer, always keep your distance from the house. You also need to maintain a constant distance of 12 to 14 inches between the nozzle and the house. You should also keep in mind that you may damage your mortar joints with a high pressure washer. To avoid doing so, you should direct the high pressure water spray over and away rather than directly through the joints and seams.

To rinse, you have to start at the gutters and work your way down to the foundations. Rinsing the house means that you have to get the entire soap residue and dirt films off the house.

When buying pressure washers, you have to remember that the most important thing that you should look for is the amount of pressure it gives. It is measured in PSI. The amount of PSI you should get for a pressure washer should at least be 2000PSI. This will ensure that the force will be strong enough to loosen dirt. You should also get a pressure washer that expels water for at least 2 gallons per minute or GPL.

These are the things that you should look for in a pressure washer when you are planning to clean the exterior of your house. Other features that you may want would be interchangeable nozzles, and telescopic feature which will make it easier for you to clean hart to reach places.

With a high pressure washer, cleaning the exterior of your house to get it ready for repainting will be a lot easier to do.

About the Author
By James Utterson, feel free to visit his top ranked Internet Marketing Blog: Internet Marketing

Leave a Reply

Categories